Yuhong Recycled Plastic Stretch Wrap Film is made with PCR resin blended with virgin LLDPE through co-extrusion blow molding to replace original resin. Film strength and cling are consistent and stable making the wrapped layers adhere firmly to each other and to the load allowing wrapped Pallets remain stable in warehouse storage and over-the-road transit and make sure its sharp corners and protruding edges do not easily puncture the film and effectively secure the goods on the pallet to prevent them from shaking or falling during transportation.
This Recycled Plastic Stretch Wrap Film is a stretch wrap film with recycled content, made from post-consumer recycled resin, post-industrial recycled resin, or a combination of both, combined with virgin LLDPE to maintain processability and mechanical integrity.
PCR resin is priced below virgin LLDPE. Replacing a portion of virgin material with PCR reduces raw material cost. For operations with an annual usage of several hundred tons, the cumulative savings are substantial, making this film a cost-effective choice for high-volume pallet wrapping.
We offer post consumer recycled stretch film at three recycled content levels for your specific demands of the application. All three levels are blended with virgin LLDPE to ensure consistent performance. We test every batch for tensile strength, puncture resistance, and cling force to confirm they meet industry standards.
|
PCR Content |
Best Suited For |
What to Expect |
|
30% PCR |
General pallet wrapping, moderate handling conditions |
Performance nearly identical to virgin film. Minimal difference in clarity or stretch characteristics. Recommended for first-time PCR users. |
|
50% PCR |
Standard logistics, B2B shipments, internal warehousing |
Noticeable sustainability contribution while retaining reliable strength. Good balance for most industrial applications. |
|
70% PCR |
Non-food industrial loads, closed-loop supply chains, applications with lower clarity requirements |
Highest recycled content available in this product line. Suitable for applications where PCR percentage is the primary requirement and optical clarity is not critical. |
Parameters
|
Technical Parameter |
Unit |
Typical Value |
Test Standard / Note |
|
PCR recycled content |
% |
30 / 50 / 70 |
Post-consumer recycled resin, customizable ratio |
|
Film thickness range |
μm |
17 – 30 |
Blended with virgin LLDPE for stable performance |
|
Standard roll width |
mm |
300 – 750 |
Available for both hand and machine use |
|
Tensile strength retention |
% |
≥ 90 |
Compared to 100% virgin film of same thickness |
|
Puncture resistance |
N |
≥ 1.8 |
Matches industry standard for general cargo |
|
Carbon emission reduction |
% |
20 – 45（Based on internal estimation / third-party LCA study） |
vs virgin film, based on PCR content ratio |
|
Available roll formats |
– |
Hand roll / Machine jumbo roll |
Both hand and machine grades available |
|
Feature |
– |
Lower carbon footprint, verifiable PCR content, same performance |
For sustainability-focused businesses and eco-certified supply chains |
The production of PCR Recycled Plastic Stretch Wrap Film requires strict control from recycled material inspection to finished roll testing. Yuhong follows a controlled manufacturing process to ensure recycled content consistency, mechanical performance, and batch traceability.
Incoming PCR materials are checked for appearance, contaminants, and basic physical properties to ensure batch-to-batch consistency.
PCR resin is blended with virgin LLDPE at specified ratios such as 30%, 50%, or 70% to meet recycled content targets while maintaining film strength, stretchability, and cling.
Color masterbatch or performance modifiers are added as required, with automated feeding systems controlling dosage accuracy.
The blended materials are processed through a multi-layer co-extrusion blown film line, with each layer optimized for mechanical strength, stretch performance, or surface cling.
Film uniformity is continuously checked during extrusion, with real-time adjustments to maintain consistent thickness across the full width.
Finished batches are tested for tensile strength, elongation, puncture resistance, and cling force to confirm that PCR-blended film meets applicable performance requirements.
Recycled content documentation is available for each batch, for customers' procurement records.
Production records are maintained from raw material intake to finished goods shipment, supporting quality verification and supply consistency.
Our eco friendly recycled wrap fits:
1. Chemical drums, cartons, and building materials in non-food industrial palletizing.
2. Semi-finished goods or internal transfer packaging.
3. Export shipments and B2B logistics.
4. Any operation enterprise with a mandated PCR content target EU PPWR, California SB 54, or corporate sustainability reporting.
It doesn't fit:
1. Direct food contact unless the PCR source carries food-grade certification.
2. High-clarity applications such as retail shelf presentation.
3. Protection of high-value or sharp-edged products where puncture resistance margin is insufficient.
We have established a comprehensive quality management system covering every stage from raw material procurement and production to final delivery.
ISO 9001:2015 is the world's most widely adopted quality management standard. Our quality management system covering planning, operations, inspection, and continuous improvement that fully complies with international requirements. From blown film extrusion to slitting and packaging, every production step is strictly controlled to ensure stable quality and ongoing enhancement.
The RoHS Directive (EU) 2015/863 restricts the use of hazardous substances in electronic and electrical equipment. Yuhong's products have been independently tested by SGS, a world-leading inspection and certification body. The test report covers strict screening for lead, cadmium, mercury, hexavalent chromium, PBB, PBDE, and phthalates.
We are accredited to ISO 17025 and equipped with advanced testing technologies from GALAB, a renowned independent laboratory in Germany. Its SOI (Substances of Interest) program performs comprehensive residue analysis and risk monitoring for various harmful substances in products, providing full-chain quality assurance.
All Yuhong product series are supported by complete material safety data sheets and hazardous substance compliance documentation, covering REACH and other international chemical regulatory frameworks. From raw material sourcing to finished goods, we enforce strict hazardous substance control measures to ensure every batch meets the market entry requirements of different countries and regions.
A: PCR refers to post-consumer recycled resin; material reclaimed from consumer waste streams such as used stretch film collected from warehouses. PIR is post-industrial recycled resin from manufacturing scrap generated during production. Both are acceptable for recycled content compliance, but PCR carries higher regulatory credit in most frameworks because it addresses end-of-life waste. We specify PCR content in our product descriptions unless otherwise stated.
A: Yes. Standard 3-inch and 6-inch cores fit most hand dispensers and automatic systems without adapters. Film thickness, width, and roll length are available in configurations that match typical machine specifications. If you have unique requirements, we can adjust roll dimensions accordingly. The stretch characteristics of our blended formulation are calibrated to perform within the same operating parameters as virgin film.
A: Not necessarily. Our testing covers each batch for tensile strength, puncture resistance, and cling force across all PCR levels. The blend of PCR with virgin LLDPE maintains performance consistent with industry standards. And we will perform batch-to-batch control of the blend ratio and resin quality.
Recycled Plastic Stretch Wrap Film is a practical, cost-effective path to reducing virgin plastic use in pallet wrapping operations. It performs, it complies, and it lowers material spend compared to all-virgin alternatives.
Request a sample roll. Run it on your line. Check the load tightness, the cling, the breakage rate. Then place your bulk order at the PCR ratio that fits your sustainability and budget requirements.
Address: 4th Floor, No. 130, Guankou Middle Road, Guankou Town, Jimei District, Xiamen City, Fujian Province, China
Call Us: +86-18650199946
E-Mail: calvin_lin@yuhplastic.com
|
Advantage |
Description |
|
Direct Manufacturer |
Established 2008 8 dedicated stretch film lines 5,000+ tons annual capacity |
|
PCR Supply Chain Control |
In-house PCR blending Wanhua LDPE virgin resin batch-level traceability |
|
EU Compliance Expertise |
Full PPWR technical dossiers Supplier Code of Conduct signed with German partners |
|
Lab & QC |
In-house tensile, puncture, cling, and elongation testing pre-shipment batch reports |
|
Flexible OEM |
Private label printed cartons custom core IDs mixed-spec 20ft/40ft container loading |
Address
4th Floor, No. 130, Guankou Middle Road, Guankou Town, Jimei District, Xiamen City, Fujian Province, China
Tel
